This page has been archived on the Web

Information identified as archived is provided for reference, research or recordkeeping purposes. It is not subject to the Government of Canada Web Standards and has not been altered or updated since it was archived. Please contact us to request a format other than those available.

Skip booklet index and go to page content

References

Aljabri, N., Venkatasubramanima, K. G., AlFarsi, Y. A. M., HF Emission from Dubai’s Electrolysis Cell, Light Metals 2003, p. 487.

Beaudry, M., Plante, M., Alcoa Maintenance Best Practices to Achieve Excellence in Planning, Scheduling, Autonomous Maintenance and Reliability, Light Metals 2009, p. 485.

Beaulieu, C., Revue de la littérature portant sur les boues rouges, École polytechnique de Montréal, 2002 (in French only) (PDF Format, 1396 KB).

Broek, S., Dando, N. R., Lindsay, S. J., Moras, A., Considerations Regarding High Draft Ventilation as an Air Emission Reduction Tool, Light Metals 2011, p. 361.

Comprehensive Air Management System (CAMS) Steering Committee, Comprehensive Air Management System – A Proposed Framework to Improve Air Quality Management, April 2010 (http://www.ccme.ca/assets/pdf/cams_proposed_framework_e.pdf).

Dando, N. R., Lindsay, S. J., Hard Gray Scale, Light Metals 2008, p. 227.

Dando, N. R., Tang, R., Fluoride Evolution/Emission from Aluminum Smelting Pots – Impact of Ore Feeding and Cover Practices, Light Metals 2005, p. 363.

Dando, N. R., Tang, R., Impact of Tending Practices of Fluoride Evolution and Emission from Aluminum Smelting Pots, Light Metals 2006, p. 203.

Dando, N. R., Using Fume Duct Temperatures for Minimizing Open Holes in Pot Cover, Light Metals 2004, p. 245.

de Vasconcelos, P. D. S., Mesquita, A. L. A., Environmental Improvements During the Handling of Packing Coke at the Albras’ Bake Furnace, Light Metals 2009, p. 1049.

de Vasconcelos, P. D. S., Mesquita, A. L. A., Pneumatic Transfer of Fine Carbon Residues at Albras – A Case Study at the Carbon Plant, Light Metals 2008, p. 843.

Dupas, N., New Rodding Shop Solutions, Light Metals 2008, p. 899.

Environment Canada, Environmental Code of Practice for Base Metals Smelters and Refineries – CEPA 1999 Code of Practice, March 2006 (PDF Format, 2.6 MB).

Environment Canada, Environmental Code of Practice for Integrated Steel Mills – CEPA 1999 Code of Practice, 1st Edition, March 2001 (PDF Format, 689 KB).

Environment Canada, Environmental Code of Practice for Non-Integrated Steel Mills – CEPA 1999 Code of Practice, 1st Edition, March 2001 (PDF Format, 583 KB).

Environment Canada, National Pollutant Release Inventory (NPRI).

Environment Canada, NPRI Toolbox, Alumina and Aluminum, Aluminum Spreadsheet.

Environmental Protection Agency Ireland, BAT Guidance Note on Best Available Techniques for the General Inorganic Chemicals Sector and the Production of Alumina, 1st Edition, 2008.

European Commission, Integrated Pollution Prevention and Control – Draft Reference Document on Best Available Techniques for the Non-Ferrous Metals Industries, July 2009. (PDF Document, 5.2MB)

European Commission, Integrated Pollution Prevention and Control – Reference Document on Best Available Techniques in the Smitheries and Foundries Industry, January 2004. (PDF Document, 3.5MB)

Gaertner, H., Ratvik, A. P., Aarhaug, T. A., Particulate Emissions from Electrolysis Cells, Light Metals 2011, p. 345.

Gagné, J.-P., Boulianne, R., Magnan, J.-F., Thibault, M.-A., Dufour, G., Gauthier, C., New Design of Cover for Anode Trays, Light Metals 2006, p. 213.

Gagné, J.-P., Minville, R., Dando, N. R., Gershenzon, M., Champoux, P., Moras, A., Dufour, G., Update on the Evaluation of HF Emission Reduction Using Covered Anode Trays, Light Metals 2010, p. 291.

Girault, G., Faure, M., Bertolo, J.-M., Massambi, S., Bertran, G., Investigation of Solutions to Reduce Fluoride Emissions from Anode Butts and Crust Cover Material, Light Metals 2011, p. 351.

Gudmundsson, H., Anode Dusting from a Potroom Perspective at Nordural and Correlation with Anode Properties, Light Metals 2011, p. 471.

Iffert, M., Kuenkel, M., Skyllas-Kazacos, M., Welch, B., Reduction of HF Emissions from the Trimet Aluminum Smelter, Light Metals 2006, p. 195.

International Finance Corporation – World Bank Group, Environmental, Health, and Safety (EHS) Guidelines: Base Metal Smelting and Refining, April 2007 (PDF Format, 407 KB).

Kiss, L. I., Vékony, K., Dynamics of the Gas Emission from Aluminum Electrolysis Cells, Light Metals 2008, p. 425

Lee, J. M., Baker, J. J., Rolle, J. G., Llerena, R., Characterisation of Green and Calcined Coke Properties Used for Aluminum Anode-Grade Carbon, ACS Division of Fuel Chemistry American Chemical Society 43(2), Dallas (TX), 1998, p. 271.

Light Metals Research Centre, Fluoride Emissions Management Guide (FEMG), Version 4, February 2011.

Lindsay, S. J., Effective Techniques to Control Fluoride Emissions, Light Metals 2007, p. 199.

Mahieu, P., Neple, S., Fiot, N., Ofico, I., Eufrasio, M., High Performance Sealing for Anode Baking Furnaces, Light Metals 2011, p. 881.

Meyer, M., Girault, G., Bertolo, J.-M., Development of a Jet Induced Boosted Suction System to Reduce Fluoride Emissions, Light Metals 2009, p. 287.

Mirchi, A. A., Savard, G., Tremblay, J. P., Simard, M., Alcan Characterisation of Pitch Performance for Pitch Binder Evaluation and Process Changes in an Aluminium Smelter, Light Metals 2002.

Nagem, N. F., Batista, E., Silva, A. F., Gomes, V., Venancio, L. C. A., Souza, L. J. P., Understanding Fugitive Fluoride Emissions at the Alumar, Light Metals 2005, p. 289.

Rio Tinto Alcan Inc., Anode Grade Coke & Coke Calcination, presentation to Environment Canada, August 2011.

Roe, D. C., Recent Innovations in Controlling Dust Emissions in the Bauxite/Alumina Industry, General Electric Company, 2006 (PDF Format, 195 KB).

Sahling, M., Sturm, E., Improvement of Pot Gas Collecting Efficiency by Implementation of Impulse Dust System, Light Metals 2004, p. 351.

Slaugenhaupt, M. L., Bruggeman, J. N., Tarcy, G. P., Dando, N. R., Effect of Open Holes in the Crust on Gaseous Fluoride Evolution from Pots, Light Metals 2003, p. 199.

SNC-Lavalin Environment, Description des procédés de fabrication d’anodes et de coke calciné utilisés dans les alumineries canadiennes, prepared for Environment Canada, March 2011.

Sorhuus, A., Wedde, G., Pot Gas Heat Recovery and Emission Control, Light Metals 2009, p. 281.

Tarcy, G.P., The Affect of Pot Operation and Work Practices on Gaseous and Particulate Fluoride Evolution, Light Metals 2003, p. 193.

Tessier, J., Duchesne, C., Gauthier, C., Dufour, G., Image Analysis for Estimation of Anode Cover Material Composition, Light Metals 2008, p. 293.

The Aluminum Association, Canadian Primary Aluminum Production.

Thomas, D., Heat Transfer in the Bayer Process, Light Metals 2010, p. 161.

Tjahyono, N., Gao, Y., Wong, D., Zhang, W., Taylor, M. P., Fluoride Emissions Management Guide (FEMG) for Aluminium Smelters, Light Metals 2011, p. 301.

U.S. EPA Environmental Technology Verification Program, The Evolution of Improved Baghouse Filter Media as Observed in the Environmental Technology Verification Program, June 2008 (PDF Format, 172 KB).

U.S. EPA, Section 6 – Chapter 2: Wet Scrubbers for Particulate Matter in EPA Air Pollution Control Cost Manual – Sixth Edition (EPA/452/B-02-001), July 2002 (PDF Format 273 KB).

Vendette, H., Anode Paste Plants: Innovative Solution for Optimum Emission Performances, Light Metals 2010, p. 993.

Wilkening, S., Reny, P., Murphy, B., Anode Cover Material and Bath Level Control, Light Metals 2005, p. 367.

Wong, D. S., Tjahyono, N. I., Hyland, M. M., Visualising the sources of potroom dust in aluminium smelters, Light Metals 2012 , p. 833-838.

 

Page 9
Date modified: