This page has been archived on the Web
Information identified as archived is provided for reference, research or recordkeeping purposes. It is not subject to the Government of Canada Web Standards and has not been altered or updated since it was archived. Please contact us to request a format other than those available.
ARCHIVED - Revised Draft of the Off-Road Compression-Ignition Engine Emission Regulations
- 1. Interpretation
- 2. Purpose
- 3. Application
- 4. Model Year
- 5. Prescribed Engines
- 6. Application for Authorization to Apply the National Emissions Mark
- 7. National Emissions Mark
- 8. Engine Standards
- 9. Replacement Engines
- 10. Transition Engines
- 11. Engines Covered by an EPA Certificate
- 12. Emission-Related Maintenance Instructions
- 13. Records
- 14. Importation Requirements and Documents
- 15. Rental Rate
- 16. Exemption
- 17. Defect Information
- 18. Coming Into Force
- 19. Schedule
National Emissions Mark
(1) The national emissions mark is the mark set out in the Schedule.
(2) The national emissions mark shall be at least 7 mm in height and 10 mm in width.
(3) The national emissions mark shall be located:
- on or immediately next to the emission control information label referred to in paragraph 16(d); or
- if there is no such label, in a visible or readily accessible location.
(4) The national emissions mark shall be on a label that:
- is permanently applied;
- is resistant to or protected against any weather condition; and
- bears inscriptions that are legible and indelible and that are indented, embossed or in a colour that contrasts with the background of the label.
(5) A company that has been authorized to apply the national emissions mark shall display the identification number assigned by the Minister in figures that are at least 2 mm in height, immediately below or to the right of the national emissions mark.
A company may apply the national emissions mark to an engine that is manufactured before January 1, 2006, if:
- the engine conforms to the standards set out in these Regulations for engines of the 2006 model year; and
- the company meets the requirements of these Regulations in respect of that engine.
- Date modified: