Code de pratiques pour réduire les émissions de PM2,5 dans le secteur de l’aluminium : références

Titre officiel : Code de pratiques pour réduire les émissions de particules fines (PM2,5) dans le secteur de l'aluminium primaire

Bibliographie

Aljabri, N., Venkatasubramanima, K. G., AlFarsi, Y. A. M., HF emission from Dubal’s electrolysis cell, Light Metals 2003, p.487.

Beaudry, M., Plante, M., Alcoa maintenance best practices to achieve excellence in planning, scheduling, autonomous maintenance and reliability, Light Metals 2009, p. 485.

Beaulieu, C., Revue de la littérature portant sur les boues rouges, École polytechnique de Montréal, 2002 (http://www.polymtl.ca/enviro-geremi/pdf/articles/Projet1-4-1-BouRoug-CBeaulieuMA1.pdf).

Broek, S., Dando, N. R., Lindsay, S. J., Moras, A., Considerations regarding high draft ventilation as an air emission reduction tool, Light Metals 2011, p. 361.

Comité directeur du Système complet de gestion de l’air (SCGA), Système complet de gestion de l’air - Proposition d’un cadre pour l’amélioration de la gestion de la qualité de l’air, avril 2010, (http://www.ccme.ca/assets/pdf/cams_proposed_framework_f.pdf).

Dando, N. R., Using fume duct temperatures for minimizing open holes in pot cover, Light Metals 2004, p. 245.

Dando, N. R., Tang, R., Fluoride evolution / emission from aluminum smelting pots - impact of ore feeding and cover practices, Light Metals 2005, p. 363.

Dando, N. R., Tang, R., Impact of tending practices of fluoride evolution and emission from aluminum smelting pots, Light Metals 2006, p. 203.

Dando, N. R., Lindsay, S. J., Hard gray scale, Light Metals 2008, p. 227.

de Vasconcelos, P. D. S., Mesquita, A. L. A., Pneumatic transfer of fine carbon residues at Albras - A case study at the carbon plant, Light Metals 2008, p. 843.

de Vasconcelos, P. D. S., Mesquita, A. L. A., Environmental improvements during the handling ofpacking coke at the Albras’ bake furnace, Light Metals 2009, p. 1049.

Dupas, N., New rodding shop solutions, Light Metals 2008, p. 899.

Environnement Canada, Inventaire National des Rejets des Polluants (INRP).

Environnement Canada, Boîte à outils de l’INRP, Alumine et Aluminium, Tableur d’aluminium.

Environnement Canada, Code de pratiques écologiques pour les aciéries intégrées - Code de pratiques de la LCPE 1999, 1ère édition, mars 2001.

Environnement Canada, Code de pratiques écologiques pour les aciéries non intégrées - Code depratiques de la LCPE 1999, 1ère édition, mars 2001.

Environnement Canada, Code de pratiques écologiques pour les fonderies et affineries de métaux communs - Code de pratique de la LCPE 1999, mars 2006.

Environmental Protection Agency Ireland, BAT guidance note on best available techniques for the general inorganic chemicals sector and the production of alumina, (en anglais seulement) 1ère édition, 2008.

European Commission, Integrated pollution prevention and control - Draft Reference Document on Best Available Techniques for the Non-Ferrous Metals Industries, juillet 2009, (http://eippcb.jrc.es/reference/nfm.html).

European Commission, Integrated pollution prevention and control - Reference Document on Best Available Techniques in the Smitheries and Foundries Industry, janvier 2004, (http://eippcb.jrc.es/reference/sf.html).

Gaertner, H., Ratvik, A. P., Aarhaug, T. A., Particulate emissions from electrolysis cells, Light Metals 2011, p. 345.

Gagné, J.-P., Boulianne, R., Magnan, J.-F., Thibault, M.-A., Dufour, G., Gauthier, C., New design of cover for anode trays, Light Metals 2006, p. 213.

Gagné, J.-P., Minville, R., Dando, N. R., Gershenzon, M., Champoux, P., Moras, A., Dufour, G., Update on the evaluation of HF emission reduction using covered anode trays, Light Metals 2010, p. 291.

Girault, G., Faure, M., Bertolo, J.-M., Massambi, S., Bertran, G., Investigation of solutions to reduce fluoride emissions from anodebutts and crust cover material, Light Metals 2011, p. 351.

Gudmundsson, H., Anode dusting from a potroom perspective at Nordural and correlation with anodeproperties, Light Metals 2011, p. 471.

Iffert, M., Kuenkel, M., Skyllas-Kazacos, M., Welch, B., Reduction of HF emissions from the Trimet aluminum smelter, Light Metals 2006, p. 195.

Kiss, L. I., Vékony, K., Dynamics of the gas emission from aluminum electrolysis cells, Light Metals 2008, p. 425.

Lee, J. M., Baker, J. J., Rolle, J. G., Llerena, R., Characterisation of green and calcined coke properties used for aluminum anode-grade carbon, ACS Division of Fuel Chemistry American Chemical Society 43(2), Dallas (TX), 1998, p. 271.

Light Metals Research Centre, Fluoride emissions management guide (FEMG), Version 4, février 2011.

Lindsay, S. J., Effective techniques to control fluoride emissions, Light Metals 2007, p. 199.

Mahieu, P., Neple, S., Fiot, N., Ofico, I., Eufrasio, M., High performance sealing for anode baking furnaces, Light Metals 2011, p.881.

Meyer, M., Girault, G., Bertolo, J.-M., Development of a jet inducedboosted suction system to reduce fluoride emissions, Light Metals 2009, p. 287.

Mirchi, A. A., Savard, G., Tremblay, J. P., Simard, M., Alcan characterisation of pitch performance for pitch binder evaluation and process changes in an aluminium smelter, Light Metals 2002.

Nagem, N. F., Batista, E.,Silva, A. F., Gomes, V., Venancio, L. C. A., Souza, L. J. P., Understanding fugitive fluoride emissions at the alumar, Light Metals 2005, p. 289.

Rio Tinto Alcan Inc., Anode Grade Coke & Coke Calcination, présentation pour Environnement Canada, Août 2011.

Roe, D. C., Recent innovations in controlling dust emissions in the bauxite/alumina industry, General Electric Company, 2006, (http://www.gewater.com/pdf/Technical%20Papers_Cust/Americas/English/TP1118EN.pdf).

Sahling, M., Sturm, E., Improvement of pot gascollecting efficiency by implementation of impulse dust system, Light Metals 2004, p. 351.

Slaugenhaupt, M. L., Bruggeman, J. N., Tarcy, G. P., Dando, N. R., Effect ofopen holes in the crust on gaseousfluoride evolution from pots, Light Metals 2003, p. 199.

SNC-Lavalin Environnement, Description des procédés de fabrication d’anodes et de coke calciné utilisés dans les alumineries canadiennes, préparé pour Environnement Canada, mars 2011.

Société financière internationale - Groupe de la banque mondiale, Directives environnementales, sanitaires et sécuritaires pour la fusion et l’affinage des métaux de base (http://www1.ifc.org/wps/wcm/connect/059dbc8048855d3a8e3cde6a6515bb18/043_Smelting%2Band%2BRefining.pdf?MOD=AJPERES&CACHEID=059dbc8048855d3a8e3cde6a6515bb18), avril 2007.

Sorhuus, A.,Wedde, G., Pot gas heat recovery and emission control, Light Metals 2009, p. 281.

Tarcy, G. P., The affect of pot operation and work practices on gaseous and particulate fluoride evolution, Light Metals 2003, p. 193.

Tessier, J., Duchesne, C., Gauthier, C., Dufour, G., Image analysis for estimation of anode cover material composition, Light Metals 2008, p. 293.

The Aluminum Association, Canadian primary aluminum production, (http://www.aluminum.org/Content/NavigationMenu/NewsStatistics/StatisticsReports/PrimaryProduction).

Thomas, D., Heat transfer in the Bayer process, Light Metals 2010, p. 161.

Tjahyono, N., Gao, Y., Wong, D., Zhang, W., Taylor, M. P., Fluoride emissions management guide (FEMG) for aluminium smelters, Light Metals 2011, p. 301.

U.S. EPA, Section 6 - Chapter 2 : Wet scrubbers for particulate matter in EPA airpollution control cost manual - Sixth Edition (EPA/452/B-02-001), juillet 2002, (http://www.epa.gov/ttncatc1/dir1/cs6ch1.pdf)

U.S. EPA Environmental Technology Verification Program, The evolution of improved baghouse filter media as observed in the environmental technology verification program, (en anglais seulement) juin 2008.

Vendette, H., Anode paste plants: Innovative solution for optimum emission performances, Light Metals 2010, p. 993.

Wilkening, S.,Reny, P., Murphy, B., Anode cover material andbath level control, Light Metals 2005, p. 367.

Wong, D. S., Tjahyono, N. I., Hyland, M. M., Visualising the sources of potroom dust in aluminium smelters, Light Metals 2012 , p.833-838.

Wong, D. S., Tjahyono, N. I., Hyland, M. M., The nature of particles and fines in potroom dust, Light Metals 2014, p.553-558.

Détails de la page

Date de modification :