Environmental Code of Practice for base metals smelters and refineries: bibliography

Bibliography

Buonicore, A.J. and W.T. Davis, eds., Air Pollution Engineering Manual, Van Nostrand Reinhold, New York, 1992.

Canadian Council of Ministers of the Environment, A Canada-wide Accord on Environmental Harmonization, June 22, 1998.

Canadian Council of Ministers of the Environment, A Guide to Canada-wide Standards, February 9, 1999.

Canadian Council of Ministers of the Environment, Canada-wide Standards for Particulate Matter (PM) and Ozone, June 5-6, 2000.

Canadian Council of Ministers of the Environment, Canadian Environmental Quality Guidelines, Canadian National Ambient Air Quality Objectives, 1999.

Canadian Council of Ministers of the Environment, National Guidelines for Decommissioning Industrial Sites, Report No. CCME-TS/WM-TRE013E, March 1991, ISBN 0-662-18705-9.

Canadian Standards Association, Emergency Planning for Industry Major Industrial Emergencies - A National Standard of Canada, CAN/CSA-Z731-95, January 1995.

Canadian Standards Association, Environmental Management Systems - Specification with Guidance for Use, CAN/CSA-ISO 14001-96, 1996.

Canadian Standards Association, Guideline for Pollution Prevention, Z754-94, June 1994.

Eacott, J.G., Air Pollution Control Systems on International Copper and Nickel Smelters, prepared for Environment Canada (Contract OSS80-00108) by Questor Engineering Ltd., Toronto, March 1982.

Environment Canada, Air Pollution Emissions and Control Technology: Primary Copper Industry, Report EPS 3-AP-82-4, July 1982.

Environment Canada, Air Pollution Emissions and Control Technology: Secondary Lead Smelter and Allied Industries, Report EPS 3-AP-75-3, July 1975.

Environment Canada, Biological Test Method: Reference Method for Determining Acute Lethality of Effluents to Daphnia magna, Report EPS 1/RM/14, Second Edition, December 2000.

Environment Canada, Biological Test Method: Reference Method for Determining Acute Lethality of Effluents to Rainbow Trout, Report EPS 1/RM/13, Second Edition, December 2000.

Environment Canada, Canadian Environmental Protection Act, 1999, List of Toxic Substances.

Environment Canada, Environmental Aspects of Nickel Production: Sulphide Pyrometallurgy and Nickel Refining, Report EPS 2/MM/2, November 1987.

Environment Canada, Environmental Aspects of the Extraction and Production of Nickel, Report EPS 3-AP-82-5, background paper prepared for the United Nations Environment Programme, July 1982.

Environment Canada, News Release: Government of Canada Announces Next Steps in Program to Reduce Particulate Matter, A Primary Component of Smog, July 17, 2000.

Environment Canada, Pollution Prevention Planning Handbook, 2001.

Environment Canada, Reference Methods for Source Testing: Measurement of Releases of Particulate from Stationary Sources, Report EPS 1/RM/8, December 1993.

Environment Canada, Strategic Options for the Management of Toxic Substances from the Base Metals Smelting Sector: Report of Stakeholder Consultations, June 23, 1997.

Environment Canada and Health Canada, Canadian Environmental Protection Act, 1999, Priority Substances List Assessment Report: Respirable Particulate Matter Less Than or Equal to 10 Microns, Catalogue No. En40-215/47E, Minister of Public Works and Government Services, 2000.

Environment Canada and Ministère de l'Environnement de la Faune du Québec, Industrial Plants: Highlights, Fact Sheet 76, Nova PB Inc., January 1998.

European Integrated Pollution Prevention and Control Bureau, Reference Document on Best Available Techniques in Non Ferrous Metals Industries (PDF Document, 5.2MB), May 2000, Seville, Spain.

Falconbridge Limited, 1999 Report on Sustainable Development: Site Data.

Finlay, P., Globalization of Environmental Performance Standards, prepared for International Environmental Workshop, Minerals Council of Australia, Perth, November 1, 2000.

Fisheries and Environment Canada, Criteria for National Air Quality Objectives: Sulphur Dioxide, Suspended Particulates, Carbon Monoxide, Oxidants (Ozone) and Nitrogen Dioxide, reports to the Federal-Provincial Committee on Air Pollution, November 1976.

Fugleberg, S., Finnish Expert Report on Best Available Techniques in Zinc Production, Finnish Environment Institute, Helsinki, 1999.

Gilchrist, J.D., Extraction Metallurgy, Third Edition, Pergamon Press, Toronto, 1989.

Government of Canada, Canada Gazette, Part I, Vol. 134, No. 6, Ottawa, February 5, 2000.

Government of Canada, Canada Gazette, Part I, Vol. 134, No. 22, Ottawa, May 27, 2000.

Government of Canada, Canada Gazette, Part I, Vol. 134, No. 27, Ottawa, July 1, 2000.

Hatch Associates Ltd., Environmental Management Plan Guidance Document for the Base Metals Smelting Sector, prepared for Environment Canada, March 14, 2001.

Hatch Associates Ltd., Review of Environmental Releases for the Base Metals Smelting Sector, prepared for Environment Canada, November 3, 2000.

Kirk, R.E., D.F. Othmer, J. Kroschwitz, and M. Howe-Grant, eds., Kirk-Othmer Encyclopedia of Chemical Technology, John Wiley & Sons, New York, Vol. 7 (a) 1993, Vol. 15 (b) 1995, Vol. 25 (c) 1998.

Mining Association of Canada, It's a Fact: 1999 Facts and Figures, Ottawa, 2000.

Mining Association of Canada, The Mining Association of Canada: Environmental Policy, September 1995.

Natural Resources Canada, Minerals and Metals Sector, World Non-Ferrous Statistics 1989-1998, Ottawa, October 1999.

Riekkola-Vanhanen, M., Finnish Expert Report on Best Available Techniques in Copper Production and By-production of Precious Metals, Finnish Environment Institute, Helsinki, 1999.

SNC Group, Review of Copper and Copper-Nickel Smelting Processes for Environment Canada, SNC Contract 4645, October 1981.

United Nations Economic Commission for Europe, Protocol to the 1979 Convention on Long-range Transboundary Air Pollution on Heavy Metals, 1998.

United Nations Economic Commission for Europe, Protocol to the 1979 Convention on Long-range Transboundary Air Pollution on Persistent Organic Pollutants, 1998.

United Nations Environment Programme, Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and Their Disposal Adopted by the Conference of Plenipotentiaries on 22 March 1989.

United Nations Environment Programme, Environmental Aspects of Copper Production, UNEP/WS/NFM.6, March 1981.

United Nations Environment Programme, Environmental Management of Nickel Production: A Technical Guide, 1993.

U.S. Environmental Protection Agency, Compilation of Air Pollutant Emission Factors AP-42, Fifth Edition, Volume I: Stationary Point and Area Sources, Research Triangle Park, NC, January 1995.

U.S. Environmental Protection Agency, Method 5D - Determination of Particulate Matter Emissions from Positive Pressure Fabric Filters, Federal Register, CFR 40 Part 60, Appendix A, pp. 647-651, January 7, 1996.

U.S. Environmental Protection Agency, EPA Office of Compliance Sector Notebook Project: Profile of the Nonferrous Metals Industry, Washington, DC, September 1995.

World Bank Group, Pollution Prevention and Abatement Handbook, 1998: Toward Cleaner Production, 1998.